
Full tear-off, code-correct install, documented from deck to ridge
Roof replacement Dallas TX built to survive Texas hail
When shingles are granule-bare, curling at the edges, or the last hailstorm bruised the field and opened leaks over the living room, patching stops making sense. We strip the roof to the deck, replace damaged sheathing, and rebuild the system from the bottom up — underlayment, flashing, ventilation and a new field — to the 2021 codes Dallas adopted, with a 115 mph design wind speed.
What's included
What a full roof replacement includes
Every roof replacement in Dallas is a complete system, not just new shingles. The scope covers tear-off, deck inspection, underlayment, flashing, ventilation and cleanup, so nothing is left to fail first.
Full tear-off to deck
We strip every layer of old roofing down to the wood, then inspect the sheathing and replace damaged sheets before anything goes back down. Dallas allows no more than two roof coverings in total, so a roof already carrying two layers comes off completely.
Underlayment across the field
Synthetic underlayment goes across the field with a heavier waterproof layer in valleys, at eaves and around penetrations, giving wind-driven Dallas rain a second line of defence if it gets past a shingle.
New flashing everywhere
Chimney, wall, valley and step flashing are all replaced with new metal. Old flashing is where most repeat leaks start, so it is never reused on a replacement.
Ventilation balanced
Ridge vents on top and clear soffit intake below keep the attic from overheating in a Dallas summer, when roof surfaces can reach 150 to 170 degrees. We size the ventilation to the roof, not to a guess.
Magnetic cleanup
Tarps over landscaping, protection over the air conditioning unit, and magnet sweeps across the lawn and driveway when the work is done. Every scrap is hauled off with the old roof.
Permit and final inspection
Dallas requires a permit before any new roof covering is applied, and a final inspection once the work is complete. The permit application lists where the torn-off debris will go, and the final inspection follows proof it reached a city landfill or transfer station.
Service overview
What roof replacement in Dallas actually involves
Roof replacement in Dallas is the full removal and rebuild of your roof system, not a patch over damaged shingles. We strip every layer to the deck, inspect and replace damaged sheathing, then rebuild from the bottom up: waterproof layer in the valleys, synthetic underlayment across the field, new flashing at every penetration and wall, and a new shingle or metal field on top.
Most Dallas homeowners call after hail, wind, or a leak that keeps coming back in the same spot. Architectural shingles in Dallas–Fort Worth are commonly cited at a 15 to 25 year service life, against 25 to 30 years nationally, so a roof past its middle teens is often one storm away from replacement. If the damage came from a storm, we document it with photos and measurements so you can share a complete record with your insurer. Read the repair-or-replace guide on our blog. Read the replacement-cost guide on our blog. Read the hiring-a-roofer guide on our blog. Read the best-materials guide on our blog.
The service timeline
What to expect during your replacement
The process flexes to the condition of the roof, but these checkpoints keep every decision clear.
Inspection
We walk the roof, check the deck from the attic, and photograph anything suspicious, including ceiling stains. You get photos and a written scope, and a straight answer on whether the roof needs replacement or repair.
Scope and documents
If the damage came from a storm, we build a documentation package: measurements, hail-hit counts and the code items the work must meet, so you can share it with your insurer. If it is out of pocket, you get the itemised written quote before anything is ordered.
Tear-off and deck
The crew sets fall protection, lays tarps over landscaping, and strips the old roof. Every sheet of decking is inspected, and damaged sheathing is replaced before anything goes back down. The roof is dried in before the crew leaves for the day.
Install
Waterproof layer in the valleys and at eaves, then synthetic underlayment, then new flashing at chimneys, walls and skylights. Shingles go on at the manufacturer's nail pattern, and ridge vents cap the system, with every course chalk-lined so the lines stay true.
Cleanup and walkthrough
Magnetic sweeps across the lawn, driveway and flower beds, and every scrap hauled off. You walk the finished roof with the crew and take the photos and paperwork for the job home before we leave.
Tools & methods
Tools and methods we use on your roof
Purpose-built equipment, used by trained technicians, so the tear-off and rebuild is done accurately the first time.
Roofing nail gun
Drives nails at the manufacturer's pattern and depth, so every course of the new field is nailed to the wind rating.
Shingle remover and roofing forks
Strips every old layer to the deck without tearing up the sheathing, so damaged sheets are found before anything goes back down.
Moisture meter and inspection camera
Finds hidden leaks and wet decking from inside the attic before the tear-off starts.
Fall protection harness and roofing ladder
Keeps every installer tied off on steep pitches through the whole tear-off and rebuild.
Chalk line and tin snips
Keeps the new courses straight and cuts flashing clean at valleys, walls and chimneys.
Use cases
When Dallas homeowners call us for replacement
These examples show how the service adapts to the roof in front of us, rather than forcing every call through one repair.

Soft decking on an Oak Cliff bungalow
A 1920s bungalow with several layers of old roofing, soft decking around the chimney, and flashing patched with tar more than once. Multi-layer tear-off, sheathing replaced, chimney flashing rebuilt with new metal, and a new shingle system with ridge vent. The leak into the hallway stopped with the first rain.
Flat section leak in East Dallas
A low-slope section over a converted space with ponding water, seam failures in the old modified bitumen, and a leak after every heavy rain. The old membrane came off, tapered insulation corrected the slope, and a heat-welded membrane system with new flashing went on. The ponding stopped, and the interior stayed dry through the next storm season.
Problems we solve
Problems a new roof solves for Dallas homes
Most of the calls we get are one of these four problems — and waiting through another storm season helps none of them.
Repeat leaks in the same ceiling spot
We find the source with a moisture meter and inspection camera, then replace the failed flashing or valley liner as part of the full replacement, so the leak path is gone, not patched.
Granule loss and curling shingles
We document the condition, scope a replacement to code, and install a new architectural shingle system built for North Texas hail and wind.
Hail damage across the field
We photograph every hit, count the damage slope by slope, and document it so you can share a complete record with your insurer.
High summer electric bills
We balance intake and exhaust ventilation during the replacement with ridge vents and clear soffit intake, which moves hot air out of the attic instead of trapping it.
Cost factors
What shapes the cost of a roof replacement in Dallas
SIZE, PITCH, MATERIAL AND DECK CONDITION SET THE SCOPE
Roof size and pitch
Square footage drives the material needed, and steep pitches slow the crew and need more fall protection, which adds labour.
Layers to tear off
One layer of shingles comes off fast. Two layers add disposal and labour, and older Dallas homes often carry more than one.
Decking condition
Damaged or soft sheathing is replaced and listed in the written scope, so you know what the work includes before the roof is opened.
Customer reviews
What Dallas homeowners say
“most of the estimates were just one total number with very little detail. the quote i received was fully itemized, and miguel walked me through each part of the roofing job so i understood the materials, labor, and what would be installed.”
How much does roof replacement cost in Dallas?
It depends on the size and pitch of the roof, how many layers come off, the condition of the decking, and the material you choose. Every home is different, which is why we inspect first and give you an itemised written quote — a number that reflects your roof, not a neighbouring one. Estimates vary, and no two roofs price the same.
How long does a roof replacement take in Dallas?
It depends on the size of the roof, the pitch, how many layers are torn off, and the weather. A simple gable roof moves faster than a complex roof with hips, valleys and multiple layers. Your written scope sets out the expected schedule before work starts, and the roof is dried in before the crew leaves for the day.
Does a roof replacement need a permit in Dallas?
Yes — a permit comes before any new roof covering in Dallas. We handle the application, the debris-disposal proof, and the final inspection.
What is the best roof replacement material for Dallas heat and hail?
Architectural asphalt shingles are the standard choice for most Dallas homes. Impact-resistant Class 4 shingles are the hail answer for Dallas — they are built to take harder hits than standard shingles. Standing seam metal and concrete tile last longer and reflect more heat, and we match the material to your roof pitch, the look of the home, and the rules of any conservation district.
Ready when you are
Get your roof replacement Dallas TX quote
An inspection, photos, and an itemised written quote. If storm damage is involved, we document it so you can share a complete record with your insurer. Call (469) 960-7533 and talk to the team.

Talk with the local team
Request Roof Replacement
Call us at (469) 960-7533 or send a message and we will get back to you. We are open 24 hours, every day. Tell us what is going on with your roof and we will give you a straight answer on what it needs.




