
Curb, flashing and glass — the flashing is the job
Skylight Installation in Dallas TX for Dry, Bright Rooms
A skylight in Dallas is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. We install skylights across Dallas — the curb framed, the skylight set on it, and the flashing woven around the curb so the water runs over the joints. The glass is the easy part. The flashing is the job, and the flashing is what keeps the roof dry.
What's included
What skylight installation includes
A skylight installation in Dallas is a roofing job first and a window job second: the opening, the curb, the flashing and the glass — each part fitted to the roof, each joint lapped so the water runs over it.
Curb framed properly
The opening is cut in the decking and the curb is framed, raised above the roof surface so the water runs around it, not into it.
Flashing woven around the curb
Step flashing and counter flashing are woven around the curb with new metal, so the water runs over the joints. The flashing is the job, and it is done with new metal.
Fixed or venting
A fixed skylight suits a hallway or a living room where the light is the point. A venting skylight opens to let the steam and the heat out, which suits a bathroom or a kitchen.
Every roof, a different detail
The flashing detail is different on shingle, tile, metal and flat roofs, and the curb is framed to suit the roof. A skylight on a flat roof needs a curb raised higher.
Interior finished
The interior is finished around the opening, so the skylight looks like it was always there, not added after.
Documented throughout
Photos of the opening, the curb, the flashing and the finished skylight, so you can see what the work was and what it is now.
Service overview
What skylight installation in Dallas actually involves
Skylight installation in Dallas is the fitting of a skylight to a roof: a framed opening in the decking, a curb raised above the roof surface, the skylight set on the curb, and the flashing woven around it so the water runs over the joints. The work is a roofing job first and a window job second, because the roof has to stay dry.
A skylight in Dallas is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. The installation starts with the curb: a framed opening in the decking, raised above the roof surface, with the skylight set on it and the flashing woven around the curb so the water runs over the joints. The glass is the easy part — the flashing is the job. A skylight that is installed with new flashing, new step flashing and new counter flashing, will not leak; a skylight that is set into old flashing will.
The service timeline
What to expect during your skylight installation
The order is the same on every skylight installation, whatever the room.
Inspection
We look at the roof and the room, checking the slope, the structure and the light the room needs. You get photos and a written scope.
Scope
The written scope names the skylight size and type, the curb, the flashing, and the interior finish around the opening, so the job is agreed before anything is cut.
Opening and curb
The opening is cut in the decking, the curb is framed and raised above the roof surface, and the skylight is set on the curb.
Flashing
Step flashing and counter flashing are woven around the curb with new metal, so the water runs over the joints, and the shingles are re-set around the curb.
Finish and walkthrough
The interior is finished around the opening, the ground is swept with a magnet, and a walk of the skylight with you. You receive the photos and paperwork for the job.
Tools & methods
Tools and methods we use on your skylights
Skylight tools are for framing and flashing — the saw, the snips and the brake, in that order.
Circular saw and framing tools
Cuts the opening in the decking and frames the curb, raised above the roof surface so the water runs around it, not into it.
Tin snips and brake
Cuts and folds the step flashing and counter flashing to fit the curb exactly, so the water runs over the joints.
Pry bar and shingle remover
Lifts the courses around the opening without tearing the good shingles, so the flashing weaves in cleanly.
Sealant
Seals the joints where the detail calls for it — at counter flashing, laps and terminations — never as a substitute for new metal.
Roofing nail gun
Fastens the replacement shingles around the curb at the manufacturer's pattern and depth, so the repair holds in a 115 mph design wind.
Level and square
Sets the curb level and square, so the skylight sits properly and the flashing laps correctly on every side.
Interior finish tools
Finishes the ceiling around the opening, so the skylight looks like it was always there, not added after.
Use cases
When Dallas homeowners call us for skylights
These examples show how a skylight is installed around the flashing, not just the glass.

Skylight in a Lakewood kitchen
A kitchen that was dark in the middle of the day, where the roof above it had a clear slope. A skylight was installed over the kitchen, the curb was flashed with new metal, and the ceiling was finished around the opening.
Skylight in a Preston Hollow bathroom
A bathroom with no window, where the roof above it was the only source of light. A skylight was fitted with a venting unit, so the bathroom gets light and the steam has a way out.
Problems we solve
Problems a skylight solves for Dallas homes
Most skylight installation calls are one of these four. Each one is a room that needs light, and a roof that has to stay dry.
Dark hallway or bathroom
We fit a skylight over the room, with the curb framed and the flashing woven around it, so the light comes in and the water stays out.
Room with no window
A skylight is the only source of light for a room with no window. We set the opening over the room that needs it, and finish the interior around it.
Skylight that leaks
Most skylight leaks are flashing leaks, not glass leaks. We renew the flashing around the curb with new metal, so the water runs over the joints.
Skylight fogging up
A skylight that fogs has lost its seal, and the glass has to be replaced. The flashing is checked at the same time, because a skylight that is opened is a skylight that should be flashed properly.
Cost factors
What shapes the cost of skylight installation in Dallas
SIZE, TYPE, AND THE ROOF AROUND THE OPENING
Size of the skylight
A larger skylight needs a larger opening, a larger curb and more flashing. The size is set by the room and the light it needs.
Fixed or venting
A venting skylight opens to let the steam and the heat out, and costs more than a fixed unit. The choice depends on the room.
Roof around the opening
The flashing detail is different on shingle, tile, metal and flat roofs, and the condition of the roof around the opening sets the scope.
Customer reviews
What Dallas Customers Say
“We hired Fonseca Brothers Roofing & Remodeling to replace our roof and fix water damage from a leak over our garage. We compared quotes from three roofing companies, and keith gave a mid range estimate, but his professionalism, clear communication, and honest approach made the decision easy.”
How much does skylight installation cost in Dallas?
It depends on the size of the skylight, whether it is fixed or venting, and the condition of the roof around the opening. A fixed skylight on a straightforward slope is a small job; a large venting unit is a bigger one. We inspect first and give you an itemised written quote for the installation as scoped.
Can a skylight be installed on any roof?
A skylight can be installed on most roof types — shingle, tile, metal and flat — but the flashing detail is different on each, and the curb is framed to suit the roof. A skylight on a flat roof needs a curb raised higher, so the water does not pond against it. The inspection sets out what your roof needs.
Should I choose a venting or fixed skylight?
Yes. A venting skylight opens to let the steam and the heat out, which suits a bathroom or a kitchen. A fixed skylight does not open, which suits a hallway or a living room where the light is the point. The choice depends on the room, not the roof.
Will a skylight leak?
A skylight is a hole in the roof, and a hole in the roof has to be flashed properly or it will leak. The installation is the curb, the flashing and the glass together — and the flashing is the job. A skylight that is installed with new flashing, new step flashing and new counter flashing, will not leak.
Ready when you are
Get your skylight installation Dallas TX quote
An inspection, photos, and an itemised written quote for the skylight installation as scoped. Call (469) 960-7533 and tell us about the room that needs light.

Talk with the local team
Request Skylight Installation
Call us at (469) 960-7533 or send a message and we will get back to you. We are open 24 hours, every day. Tell us about the room and the roof above it, and we will give you a straight answer on what it needs.




